Holzmann ED 750 FD, User Manual

Page: 30 / 64

SAFETY GUI DELI N ES
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Seit e 3 0
METALLDREHMASCHINE / METAL TURNING LATHE ED 750FD
1 2 .2 I nt ended Use
The machine must only be used for its intended purpose! Any other use is deemed to be a case of
misuse. The machine is used for drilling in wood, plastic and metal.
To use the machine properly you must also observe and follow all safety regulations, the assem-
bly instructions, operating and maintenance instructions lay down in this manual.
All people who use and service the machine have to be acquainted with this manual and must be
informed about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
Any manipulation of the machine or its parts is a misuse, in this case HOLZMANN-Machines and
its sales partners cannot be made liable for ANY direct or indirect damage.
Even when the machine is used as prescribed it is still impossible to eliminate certain residual risk
factors.
W A R N I N G

Use only drills allow able for t his m achine!

N ever use a dam aged drill!

Use t he m achine never w it h defect ive or w it hout m ount ed guard
H I GH EST RI SK OF I N JURY!
12.2.1 Am bient condit ions
The machine may be operated:
humidity max. 70%
tempe5°
С
to +40°
С
(+41°F to +104°F)
The machine shall not be operated outdoors or in wet or damp areas.
The machine shall not be operated in areas exposed to increased fire or explosion hazard.
12.2.2 Prohibit ed use

The operation of the machine outside the stated technical limits described in this manual is
forbidden.

Operation of the machine function without emergency stop button or impeller box with open
doors is prohibited.

The use of the machine not according with the required dimensions is forbidden.

The use of the machine not being suitable for the use of the machine and not being certified
is forbidden.

Any manipulation of the machine and parts is forbidden.

The use of the machine for any purposes other than described in
1 2 .1
is forbidden.

The unattended operation on the machine during the working process is forbidden!

It is not allowed to leave the immediate work area during the work is being performed.