DISPOSAL
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
34
ZX40PC
DISPOSAL
Observe the national waste disposal regulations. Never dispose of the
machine, machine components or equipment in residual waste. If necessary,
contact your local authorities for information on the disposal options
available.
If you buy a new machine or an equivalent device from your specialist dealer,
he is obliged in certain countries to dispose of your old machine properly.
TROUBLESHOOTING
W A R N I N G
Danger due to electrical voltage! Manipulating the machine with the power supply
up can lead to serious injuries or death. Always disconnect the machine from the
power supply before carrying out any troubleshooting work!
Many possible sources of error can be excluded in advance if the machine is properly connected
to the mains.
If you are unable to carry out necessary repairs properly and/or do not have the required
training, always consult a specialist to correct/solve the problem!
Fault
Possible cause
Remedy
Spindle does not rotate
Motor does not run
Incorrect mains connection
Have checked by a specialist
Switch damaged
Check/repair the switch
Motor damaged
Check/repair the motor
Incorrect rotation
Switch knob indicates wrong
direction
Change to correct position
Spindle does not reach speed
Extension cable too long
Exchange extension cable
Motor not suitable for existing
voltage
see switch box cover for correct
wiring
Problems with mains
Contact the electrical specialist
Maschine vibriert stark
Stands on uneven ground
Realign
Motor fastening is loose
Tighten the screws.
