HOLZMANN MASCHINEN TS 250F, User Manual

Page: 58 / 170

MAINTENANCE AND CARE
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 58
TS 250F
14.2.5 Install new drive belt and drive shaft
The drive belt and the drive shaft is mounted in the reverse manner as during dismantling
Remove the remains of a worn drive belt from
the pulley.
INFO: Put on the bearing seats lightly oil.
The drive shaft 2 with the flattened sides
-circled- carefully into the seat also matching the
pulley insert.
 pat in with mallet totaly
 Place the disc onto the drive shaft.
 Thighten the nut by drive shaft and hold with a
wrench on the other side.
INFO: When tightening always make for smooth
running of the drive shaft.
14.2.6 Mounting on the motor bracket
The motor bracket is mounted in the reverse way as during disassembly again
 Insert the motor mount to the left in the guide.
 Insert right on top of the screw and screw the
self-locking nut, but do not fully tighten! -Arrow-
disc
nut