HOLZMANN MASCHINEN TS 250F, User Manual

Page: 61 / 170

TROUBLESHOOTING
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 61
TS 250F
15 TROUBLESHOOTING
Disconnect the machine from the power supply prior to any checks performed at the
machine itself !
Trouble Possible cause Solution
Machine does not start  Emergency stop switch to
switch off
 switch is broken
 Turn the emergency OFF
switch to the right to unlock
to
 Repair the the switch
Burn marks on the work-
piece  The blade is blunt  Replace the blade
The finished size of the
machined workpiece does
not correspond to the set
cutting width on rip fence  Adjusted measurement
scale for the cutting width
display
 Setting dimension scale : cut
workpiece on the rip fence ,
measure the workpiece and
the measuring scale move
so that the measured aver-
age width is shown at the
edge of the ruler
Workpiece clamped in
advancing
 dull blade
 Riving knife thickness does
not match the used blade
 Replace with sharp blade
 Splitting wedge thickness
must be greater than or
equal to blade thickness .