SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
18
HUB15FLEX_24V; HUB15MOVE_24V
SAFETY
This section contains information and important notices for safe start-up and handling of the
machines.
For your own safety, read these operating instructions carefully before putting the
machine into operation. This will enable you to handle the machine safely and
prevent misunderstandings as well as possible damage to property and persons. Also
observe the symbols and pictograms used as well as the safety instructions and
hazard warnings!
13.1
Intended use of the machine
The machine is intended exclusively for the following activities:
Lifting and transportation of goods on flat ground within the describted machine limits.
HOLZMANN MASCHINEN
assumes no responsibility or warranty for any other use or use
beyond this and for any resulting damage to property or injury.
13.1.1
Technical Restrictions
The machine is intended for use under the following ambient conditions:
Relative humidity:
max. 65 %
Temperature (for operation)
+5° C bis +40° C
Temperature (for storage and/or transport)
-20° C bis +55° C
13.1.2
Prohibited Use / Forseeable Misuse
-
Operation of the machine without adequate physical and mental aptitude
-
Operating the machine without knowledge of the operating instructions
-
Changes in the design of the machine
-
Operating the machine under explosive conditions
-
Operating the machine outside the specified power range
-
Remove the safety markings attached to the machine.
-
Modify, circumvent or disable the safety devices of the machine.
The prohibited/hazardous use or disregard of the information and instructions presented in
this manual will result in the voiding of all warranty and damage claims against Holzmann
Maschinen GmbH.
13.2
User Qualification
Prerequisite for the use / operation of the machine is a corresponding physical and mental
aptitude as well as knowledge and understanding of the instruction Manual.
Please note that local laws and regulations may determine the minimum age of the
operator and restrict the use of this machine!
Put on safety shoes before working on the MACHINE.
Work on electrical components or equipment may only be carried out by a qualified
electrician or carried out under the guidance and supervision of a qualified Electrician.
13.3
Safety Devices
The machine is equipped with following safety devices:
Emergency reverse button: prevents users from being injured if
the lift truck reverses quickly. If the emergency reverse button
is pressed or bumps into an obstacle (e.g. the operator's body),
the lift truck's reverse movement is stopped abruptly. Press and
pull out the O
N
-O
FF
-switch to "unlock"!
sympol pic
Summary of Contents for HUB15FLEX 24V
Page 33: ......
