SAFETY GUIDELINES
HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at
Seite 30
METALLDREHMASCHINE / METAL TURNING LATHE ED 1000G / GDIG
The same applies for the general rules of occupational health and safety.
Any manipulation of the machine or its parts is a misuse, in this case HOLZMANN-Machines
and its sales partners cannot be made liable for ANY direct or indirect damage.
Even when the machine is used as prescribed it is still impossible to eliminate certain residual
risk factors.
W A R N I N G
Use only drills allowable for this machine!
Never use a damaged drill!
Use the machine never with defective or without mounted guard
HIGHEST RISK OF INJURY!
11.2.1
Ambient conditions
The machine may be operated:
humidity max.
70%
tempe5°
С
to +40°
С
(+41°F to +104°F)
The machine shall not be operated outdoors or in wet or damp areas.
The machine shall not be operated in areas exposed to increased fire or explosion hazard.
11.3
Prohibited use
The operation of the machine outside the stated technical limits described in this manual is
forbidden.
Operation of the machine function without emergency stop button or impeller box with
open doors is prohibited.
The use of the machine not according with the required dimensions is forbidden.
The use of the machine not being suitable for the use of the machine and not being certi-
fied is forbidden.
Any manipulation of the machine and parts is forbidden.
The use of the machine for any purposes other than described in 12.1 is forbidden.
The unattended operation on the machine during the working process is forbidden! It is
not allowed to leave the immediate work area during the work is being performed.
11.4
Security instructions
Missing or non-readable security stickers have to be replaced immediately!
To avoid malfunction, machine defects and injuries, read the following security instructions!
The locally applicable laws and regulations may specify the minimum age of the operator and limit
the use of this machine!
Summary of Contents for ED 1000G
Page 89: ......
