TROUBLESHOOTING
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
24
BS125M
14.5
Disposal
Observe national waste disposal regulations. Do not dispose of the machine,
machine components or operating materials in residual waste. If necessary,
contact your local authorities for information on available disposal options.
If you buy a new machine or an equivalent machine from your dealer, he is
obliged in certain countries to dispose of your old machine properly.
15
TROUBLESHOOTING
BEFORE YOU START WORKING FOR THE ELIMINATION OF DEFECTS, DISCONNECT THE
MACHINE FROM THE POWER SUPPLY.
Trouble
Possible cause
Solution
Machine does not start
Machine not connected to
power supply
Fuse of power circuit
defect or not suitable
Cable defect
Check all power
connections
Change fuse
Change cable
Saw band does not come to
full speed, no power
To long extension cord
Power supply not
matching with motor
requirements.
Weak, instable/volatile
power supply
change to suitable
extension cord with
sufficient cross-section,
insulation and length
Let check by electrician
Contact electric power
company
Motor gets hot very fast and
has weak performance
Motor does not receive
power on one or even 2
phases
Shut off machine
immediately. Let the
connection to supply
circuit be checked by an
electrician!
Machine vibrates
Placed on uneven
underground
Motor or any other parts
loose
modify
check all screw joints if
tightened
Bad cuts
too high descent velocity
unsuitable saw band for
cutted material
worn saw band
saw band not tensioned
correctly
saw band guide
outbalanced
Reduce the descent
velocity
Use e.g. for stainless steel
HQ Bi-Metal bands only
replace
tension saw band correctly
readjust saw band guide
