HOLZMANN MASCHINEN AKM1020P, Manual

Page: 19 / 36

SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 19
AKM1020P | AKM1520 | AKM2020
12 SAFETY
This section contains information and important notes on safe commissioning and handling of the
machine.
For your safety, please read this manual carefully before commissioning. This will
enable you to handle the machine safely and prevent misunderstandings as well
as personal injury and damage to property. In addition, observe the symbols and
pictograms used on the machine as well as the safety and danger information!
12.1 Intended Use of the Machine
The machine is intended exclusively for the following activities:
For bevelling sheets of steel/aluminium or other metallic materials within the specified technical
limits.
N O T E
HOLZMANN MASCHINEN GmbH assumes no responsibility or warranty for any other
use or use beyond this and for any resulting damage to property or injury.
Technical restrictions
The machine is intended for use under the following ambient conditions:
Rel. Humidity max. 65 %
Temperature (operation) +5 °C bis +40 °C
Temperature (storage, transport) -20 °C bis +55 °C
Prohibited use / Forseeable misuse
- Operating the machine outdoors.
- Operating the machine without adequate physical and mental fitness.
- Operating the machine without knowledge of the operating instructions.
- Modifications to the design of the machine.
- Operating the machine outside the limits specified in this manual.
- Removing the safety markings affixed to the machine.
- Modifying, bypassing or disabling the safety devices of the machine.
The improper use or disregard of the versions and instructions described in this manual will result
in the voiding of all warranty and compensation claims against HOLZMANN MASCHINEN GmbH.
12.2 User requirements
The physical and mental suitability as well as knowledge and understanding of the operating
instructions are prerequisites for operating the machine. Persons who, because of their physical,
sensory or mental abilities or their inexperience or ignorance, are unable to operate the machinery
safely must not use it without the supervision or instruction by a responsible person.
Please note that local laws and regulations may stipulate the minimum age of the
operator and restrict the use of this machine!
Put on your personal protective equipment before working on the machine.
12.3 General safety instructions
To avoid malfunctions, damage and health hazards when working with the machine, in addition to
the general rules for safe working, the following points must be observed:
 Before commissioning, check the machine for completeness and function.
 Choose a level, vibration-free, non-slip surface for the installation location.
 Anchor the machine to the ground to prevent the machine from lifting off or falling over
when bevelling!