OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
23
AKM1020P | AKM1520 | AKM2020
AKM1520
1.
Assembly support feet
Assemble the support feet on the left and
right with the corresconding screws and
washers (1).
2.
Fixation to the floor
Fix the machine to the installation site on the
left and right to the insinde oft the support
feet (2) and on the left and right to the inside
of the foot pedal (3).
AKM2020
1.
Fixation to the floor
Fix the machine to the installation site at the
installation site using the front (1) and rear
(2) support feet on the left and right sides of
the machine respectively.
15
OPERATION
Only operate the machine when in perfect condition. A visual inspection of the machine must be
carried out before each operation. Control elements are to be checked carefully. Check screw
connections for damage and tight fit.
C A U T I O N
Cutting injuries due to sharp edges!
The sharp edges of metal sheets can cause cut injuries during handling.
These injuries can be prevented by using suitable protective gloves and simple
aids (hand magnets, hand suction cups, carrying clamps, carrying claws)!
Summary of Contents for AKM1020P
Page 36: ......
