CLEANING, MAINTENANCE, STORAGE, DISPOSAL
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
27
AKM1020P | AKM1520 | AKM2020
16
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
16.1
Cleaning
N O T I C E
Incorrect cleaning agents can damage the machine's finish. Do not use solvents, nitro
thinner or other cleaning agents for cleaning that could damage the machine's finish.
Observe the information and instructions of the cleaning agent manufacturer!
Prepare the surfaces and lubricate the bare machine parts with an acid-free lubricating oil.
Regular cleaning is a prerequisite for the safe operation of the machine and its long service life.
Therefore, clean the machine after each use, at least once a week.
16.2
Maintenance
The machine is low-maintenance and only a few parts have to be serviced. Nevertheless,
malfunctions or defects which could impair the safety of the user must be rectified immediately!
Check all connections for tightness at least once a week.
Regularly check that the warning and safety labels on the machine are in perfect and
legible condition.
Replacing bevelling segments
Unscrew the relevant bevelling segment with an allen key and replace it with a new bevelling
segment. Make sure that the new bevelling segment is aligned parallel.
Maintenance Plan
The type and degree of machine wear depend to a large extent on the operating conditions. The
following intervals apply when the machine is used within the specified limits:
16.3
Storage
N O T E
Improper storage can damage and destroy important components. Only store packed
or unpacked parts under the intended environmental conditions!
When the machine is not in use for a longer period of time, store it in a dry, frost-proof and
lockable place in order to prevent rust from forming and to keep unauthorised persons and
especially children away from the machine.
16.4
Disposal
Observe the national waste disposal regulations. Never dispose of the
machine, machine components or equipment in residual waste. If necessary,
contact your local authorities for information on the disposal options
available. If you buy a new machine or an equivalent device from your
specialist dealer, he is obliged in certain countries to dispose of your old
machine properly.
Interval
Component
Activity
Daily
Maschine
Clean the machine and protect bare spots with acid-
free lubricating oil (e.g. WD40).
Monthly
Moving connection
parts
Clean from dust if necessary
If required
Bevelling segments
Change
Summary of Contents for AKM1020P
Page 36: ......
