Parts Name
4GB
Common Problems and Solutions
-14-
Problems
Reasons
Solutions
The lights on the drone are
flashing, but the drone is not
responding.
1. Insufficient battery power.
2. Transmitter is not connected to the
drone.
3. Unbalanced landing position.
4. Drone cannot be paired because the
drone has been on for a long period
of time.
1. Fully charge the battery.
2. Turn off the drone and transmitter, then,
reconnect them by turning them on again.
3. Place the drone in a level surface
when pairing.
4. Turn off the drone and transmitter, then,
turn them on again to pairing.
The propellers spin, but the
drone doesn’t fly.
1. Insufficient battery power.
2. Propellers not installed in the correct
orientation.
3. Damaged propellers.
4. Something caught in the propellers
or gears.
1. Fully charge the battery.
2. Check the letter “A” and “B ” which
printed on the propellers correspond to
the diagram on page 3 of this manual.
3. Replace old propellers with new ones.
4. Ensure gears and propellers are clear
and there is nothing caught in them.
1. Upper Cover
2. Lower Cover
3. CW Propellers
4. CCW Propellers
5. CW Motors
(Red and Blue wire)
6. CCW Motor
(White and Black wire)
7. Battery
8. USB Charging
Cable
9. TF Card and
Card Reader
10. Gear Assembly
11. Propeller Guard
12. Landing Gear
