Please Note:
When one propeller does not spin while the others do, or the propeller spins at a different
speed rate, the motor of this propeller might be burnt out. The motors and circuit board will
heat up with use. Take a 10 minutes cool down break between flights to ensure your parts last
as long as possible.
The drone has a low battery alert to allow the pilot time to land the drone in a safe, controlled
manner. When the battery level gets low, the LED lights will start to blink. Land in a safe
location as soon as possible to prevent a crash or over discharging the battery.
Problems
Reasons
Solutions
The drone doesn’t fly properly
after a crash
1. Propellers not installed in the correct
positions.
2. Damaged propellers.
3. The gyro has lost calibration.
4. Propellers have hit the propeller guard.
5. Wire or circuit board broken.
6. Motors burnt out.
1. Check the propeller order.
2. Replace propellers with new ones.
3. Reset the gyro. Press trim buttons to
fine tune the direction.
4. Make sure propellers are work well.
5. Replace the circuit board.
6. Replace the motors.
One Key Return button doesn’t
work properly.
1. Pilot changed position/ location
after connecting the transmitter to the
drone.
2. Transmitter button doesn’t function.
3. Battery low on charge.
1. Reconnect the transmitter and the
drone for use with the One Key Return,
and ensure that you don’t move or turn
after doing so.
2. Use another transmitter.
3. Fully charge the battery, or use a
new battery.
Photo or Video doesn’t work
properly.
1. Insufficient battery power.
2. The camera is broken.
3. TF card is full.
1. Fully charge battery or use new
battery.
2. Replace the camera.
3. Remove files from TF card, or use
and empty TF card.
Image can’t be displayed on
computer
1. Media player does not support the
file format.
2. Video is not successfully recorded.
1. Try new media player( such as VLC
Media Player).
2. Press video button second times to
stop record and save the file.
-15-
