Acessa
®
ProVu System User’s Guide
PL-01-0040
CO 20-131 Revision: C
13
Next, the User Interface screen will appear and start with the selection of the OR layout. See figure below:
The four options are:
•
Layout 1: Monitors are at the patient’s right, surgeon is on the patient’s left. The left side shows Guidance,
and the right side shows the ultrasound.
•
Layout 2: Monitors are at the patient’s feet, surgeon is on the patient’s left. The right side shows Guidance,
and the left side shows the ultrasound.
•
Layout 3: Monitors are at the patient’s left, surgeon is on the patient’s right. The right side shows Guidance,
and the left side shows the ultrasound.
•
Layout 4: Monitors are at the patient’s feet, surgeon is on the patient’s right. The left side shows Guidance,
and the right side shows the ultrasound.
The screen layout is most efficient if the ultrasound side is closest to the laparoscope monitor.
10.2.
Accessory Connections
The Accessory Connection Dialogue Box is displayed in the lower right corner of the screen. See below:
•
As the accessories are connected, the screen will display proper connection by changing the gray icon to a white icon
with a green check inside the white icon.
•
When all the accessories are connected, the Accessory Connection dialogue box will disappear and a green check will
appear. This means that all accessories are connected and working properly. The system is now ready to use.
Layout 1
Layout 2
Layout 3
Layout 4
Pad
Connection
TTFG or PFG
Connection
Handpiece
Connection
Transducer
Connection
Transducer Sensor
Connection