Acessa
®
ProVu System User’s Guide
PL-01-0040
CO 20-131 Revision: C
10
D.
Check Button
Used to accept the current menu item.
E.
Ultrasound Depth Adjustment
Pressing the + (up) or – (down) buttons will adjust the Depth or magnification of the ultrasound image. The
supported ultrasound depths are: 3cm, 4cm, 5cm, 6cm, 7cm, 8cm, and 9cm.
F.
Ultrasound Frequency Adjustment
Pressing the + (up) or – (down) buttons will adjust the Frequency of the ultrasound. The supported
frequencies are: 5MHz, 6MHz, 9MHz, and 12MHz.
G.
Ultrasound Gain Adjustment
Pressing the + (up) or – (down) buttons will adjust the Gain of the ultrasound.
H.
Ultrasound Focus Adjustment
Pressing the + (up) or – (down) buttons will move the Focus of the ultrasound. The supported focal depths
are: 0.2cm, 0.4cm, 0.7cm, 1cm, 1.4cm, 1.8cm, 2.3cm, 3cm, 4cm, 5cm, 6cm, and 8cm.
I.
Dual Foot Pedal Connector
Accepts the connector from the foot pedal tubing.
J.
Field Generator Connector
Accepts the connector from either the Table Top Field Generator or Planar Field Generator.
K.
Handpiece Connector
Accepts either end of the Handpiece Cable.
L.
Return Pad Connector
Accepts the Pad Cable.
M.
Transducer Sensor Connector
Accepts the cable from either the Transducer Sleeve, or the sensor cable from the Transducer with Sensor.
N.
Transducer Connector Lock
Locks the Transducer connector in place.
O.
Transducer Connector
Accepts the connector from the Transducer.
8.3.
Rear Panel
8.4.
Switches and Connections
P.
Fuse Door
The power Inlet takes two 5.0 Amp 250 volt fuses.
Q.
Main Power Switch
Main power switch. Positions are ON (l) and OFF (0).
R.
Power Cord Inlet
Port for connecting the Console to power via the medical-grade power cord.
S.
HDMI Video Connector
Port for connecting an external 1920 x 1080p monitor.
T.
USB Port
This port is for Acessa Health personnel only.
U.
Equipotential Terminal
Potential Equalization Terminal. This terminal is available for providing a direct connection between other
electrical equipment for potential equalization (if needed).
