4)
Setting the Time, Date, ºC or ºF, Pressure in hPa or inhg &
Rainfall in mm or in
To make these adjustments you must work through all the settings in sequence. If you stop for
more than 20 seconds without adjusting a setting the unit will automatically default out of the
programming cycle. If this happens you must start again.
To start hold the ‘MODE’ button down for 3 seconds.
• The 12/24 hour will flash. Use “
+
” and “
-
” to select the option you require then press
‘MODE’ to confirm.
• Next the display for the time zone will flash. To select the Australian time zone please leave
as “00” and press ‘MODE’ to confirm.
• Next the DM/MD will flash, Use “
+
” or “
-
” to select the option you require then
press
‘MODE’ to confirm.
• Next the display for the year will flash. Use “
+
” or “
-
” to select the year then press
‘MODE’ to confirm.
• Next the display for the month will flash. Use “
+
” or “
-
” to select the month then press
‘MODE’ to confirm.
• Next the display for the date will flash. Use “
+
” or “
-
” to select the date then press
‘MODE’ to confirm.
• Next the display for the hour will flash. Use “
+
” or “
-
” to select the hour then press
‘MODE’ to confirm.
• Next the display for the minutes will flash. Use “
+
” or “
-
” to select the minutes then press
‘MODE’ to confirm.
• Next the language selection for the display of weekdays will flash.
Use “
+
” or “
-
” to select the language then press ‘MODE’ to confirm.
• Next the C/F for temperature will flash, Use “
+
” or “
-
” to select then press
‘MODE’ to confirm.
• Next the hpa/inhg for air pressure will flash, Use “
+
” or “
-
” to select then press
‘MODE’ to confirm.
• Lastly the mm/inch for rainfall and kmh/mpg will flash, Use “
+
” or “
-
” to select then press
‘MODE’ to confirm.
Once you have completed all the ‘MODE’ selections and confirmed them, your unit will be ready
to display your choice of measurements on screen.
Programming the Internal Main Unit
13
