When you first instal the batteries the first adjustment you can make is the “altitude setting”. You
will note that the pressure will display a flashing number. This reading is in metres and refers to
the height above or below sea level.
You should adjust this to reflect the altitude of the receiver unit by pushing the “
+
” or “
-
”
buttons. This adjustment is necessary to ensure the barometric pressure reading is accurate. This
is because the barometric pressure decreases with altitude.
Once adjusted push the Snooze/Light (f) button.
Next you will see the weather forecast (i) flash. By using the “
+
” or “
-
” key you can change this
forecast to match what best fits your current weather conditions.
Once adjusted push the Snooze/Light (f) button.
HINT: This feature can also be accessed by holding down the Snooze/Light key for more than 3
seconds. The receiver unit allows the adjustment of altitude between 200 below and 2000 metres
above sea level.
3) Initial Adjustments
Programming the Internal Main Unit
12
