background image

16

WARRANTY

The manufacturer guarantees to the original purchaser that any product supplied by the manufacturer will be 
free from defects in materials and workmanship for a period of three years from the date of purchase. Any 
product found to have defects in material or workmanship within the period of this Guarantee shall be repaired 
or replaced by the manufacturer FREE OF CHARGE.

The guarantor does not guarantee the fitness for a particular purpose of its products and does not make any 

guarantee, expressed or implied, other than the guarantee contained herein. The guarantor shall not be liable 
for any loss from use of the product or incidental or consequential damages including damages to other parts 
of any installation of which this product is part.

The guarantee shall not apply to any equipment which is found to have been improperly installed, set up 
or used in any way not in accordance with the instructions supplied with this equipment, or to have been 

modified, repaired or altered in any way without the express written consent of the company. This guarantee 

shall not apply to any batteries or accessories used in the equipment covered under this guarantee or to any 
damage which may be caused by such batteries.

If the Controller develops a fault, the product or panel must be returned in adequate packing with:
1.  A copy of your original invoice.
2.  A description of any fault.

It is the purchaser’s responsibility to return the controller to the manufacturer or their agent by prepaid freight.

Email: [email protected]

www.holmanindustries.com.au

HEAD OFFICE / SERVICE

11 Walters Drive

Osborne Park WA 6017

Ph: +61 8 9416 9999

Fax: +61 8 9416 9920

VICTORIAN WAREHOUSE

Ph: 03 8335 4444

Fax: 03 8335 4414

Copyright 2017 Holman Industries

HOLMAN INDUSTRIES

Summary of Contents for BTX8










Reviews: