9
XL-DB20021UM-en-US · 2019-08-07 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Mounting Instructions
8. Mounting Instructions
1. Use a mounting structure of sufficient strength to support
the rated capacity of the drawbar in accordance with
SAE J849 and SAE J847 respectively.
2. Install the drawbar in compliance with all federal,
state, or local agency regulations or laws governing the
installation and use of the product. Consult with these
agencies prior to installation or use.
3. Remove and retain the cotter pin (XB-770-1)
(Figure 2)
.
4. Remove and retain the lock nut (XB-T-316-A)
(Figure 3)
.
5. Remove and retain the washer (XA-05798)
(Figure 4)
.
6. Remove and retain the drawbar (XA-05833-S1-P)
(Figure 5)
.
continued
Figure 2
COTTER PIN
Figure 3
LOCK NUT
Figure 4
WASHER
Figure 5
HOUSING
DRAWBAR
