10
XL-DB20021UM-en-US · 2019-08-07 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Mounting Instructions
8. Mounting Instructions
continued
7. Remove and retain the two (2) rubber bushings.
8. Weld the housing to the mounting structure using a
minimum of 34.0" (863.6 mm) linear inches of
.38" (9.7 mm) weld to develop the rated capacity.
Failure to install in accordance with
these instructions (using a certified
welder) could result in trailer separation
which, if not avoided, could result in
death or serious injury.
9. Install the two (2) rubber bushings into the mounted
housing
(Figure 6)
.
10. Install the drawbar into the housing
(Figure 7)
.
continued
Figure 6
RUBBER
BUSHING
RUBBER
BUSHING
HOUSING
Figure 7
HOUSING
DRAWBAR
