User Manual
Version 1.0 13
VIII. Operating Instructions
8.1 Display introduction
①
TEMP area
(PV): Showing measured temperature.
②
SET area
(SV): Showing set temperature.
③
Heating Lamp:
It lights up when it has heat output.
④
TIME:
Time display window, it will display running time or parameter value.
8.2 Command K
ey’s Introduction
A
Used for setting parameters, the parameter setting mode could be quit by
pressing the set button for more than 3 seconds or more.
B
Used for moving the digits of setting value, internal parameters and checking
ambient temperature.
C
Used for setting value, modification of various parameters, or start / stop auto-
tuning.
D
Used for modifying set value, internal parameters or to check the remaining
period.
E
Press it for 3 seconds for operating or stopping the controller
④
①
②
③
A
B
C
D
E
