- 7 -
BUTTONS ON WEEKLY TIMER
6. RESET BUTTON:
Hidden button. Press RESET button by the point of a pencil or by a pointed article: the
display will light up for 2 seconds and all settings will be cancelled.
Factory default’s settings will be restored.
7. LOCK BUTTON:
Hidden button. Press LOCK button by the point of a pencil or by a pointed article: all the
Weekly Timer ‘s buttons are disabled, therefore all settings are locked and cannot be modified.
In LOCK mode, if a blackout takes place, settings will be locked also when power supply is
restored.
Press LOCK button again to exit lock function and allow current settings’ modification
again.
8. CANCEL BUTTON:
Press this button to cancel a wrong setting or to exit LOCK function.
9. QUERY BUTTON:
Button for checking settings.
Press CANCEL button to exit the function; press CONFIRM button to display the next
parameter for programmed time setting: in sequence, there are the Week’s Day, the Period
(1 ~ 8), the Hour for Start and Hour for Stop, the Operation Mode and Fan Speed, and
finally the set Temperature.
At each parameter, press ADD and REDUCE buttons to set your desirec selection.
Press CONFIRM button to save the setting and enter the next parameter, till the end of the
subsequent 8 Periods for programmed time setting.
Press CANCEL button to exit the function.
10. REDUCE BUTTON:
Used for changing setting parameters and reducing numerical values.
11. ADD BUTTON:
Used for changing setting parameters and adding numerical values.
12. CONFIRM BUTTON:
To save the setting. This button is also used to enter the next function.
13. TIME BUTTON:
Press this button to set current time.
Please use ADD & REDUCE buttons to adjust hour. Press CONFIRM button to save, then
press ADD & REDUCE buttons again to adjust minutes.
Press CONFIRM button to save.
