Hokkaido DTWT - IHXR, User Manual

Page: 10 / 16

- 10 -
QUERY FUNCTION
1. Press QUERY button: the first parameter which is displayed is the Week’s Day (Sun ~ Sat).
2. Press ADD or CONFIRM button if you would like to change the setting.
3. Press CONFIRM button to save the setting and to enter the next parameter.
There are the following parameters in sequence: after the Week’s Day, the
Period (1 ~ 8)
for Programmed Time Setting , the Hour for Start and the Hour of Stop, the set Operation
Mode (Heat, Cool), the Fan Speed (High, Middle, Low, Auto) and the set Temperature.
At each parameter, press ADD or REDUCE button to set your desired selection.
Press CONFIRM button to save the setting and enter the next parameter, until the end of the
subsequent 8 Periods for Programmed Time Setting.
QUERY Function
QUERY function allows to check - and eventually to change - the different parameters of
settings carried out by the Weekly Timer.
The Weekly Timer allows
8 Periods for Programmed Time Setting.
To exit QUERY function
: press CANCEL button.
To cancel QUERY function : press RESET button.
MODE ADD
REDUCE
QUERY
FAN
DATE
WEEKLY TIMER RESET LOCK
TIME CONFIRM CANCEL
EDIT
WEEKLY SCHEDULE CONTROLLER
3
1
2