
Servicing
Hohner Maschinenbau GmbH
M 45/6
41
4.2.4 Replacing the knife
- Fig. 23 -
- To replace the knife, move the knife box
completely away from the guide
by turning the
knurling wheel
and remove from the stitching head.
- Fig. 24 -
- Push the knife slider
out of the knife box
(arrow A)
Make sure that the pressure spring doesn’t strip.
- Change the knife (see following chapter)
- Fig. 26 -
- Replace knife slider
in the knife box
(arrow B), compressing the pressure spring of the knife
slider with a screwdriver, and pushing it into the knife box. Make sure that the pressure spring is
not bent.
- Fig. 23 -
- Place knife box
on the guide
.
- Attach flexible wire feed to drill hole
in knife box.
- Return knife box to the desired position by turning the knurling wheel.
4.2.4.1 Rotating/Changing the flat knife
- Fig. 25 -
The flat knife has 2 cutting edges. Each cutting edge can be used three times by means of
rotation.
- Loosen and unscrew fastening screw
.
- Rotate or replace flat knife
and tighten fastening screw
.
4.2.4.2 Replacing the circular knife
- Fig. 25 -
- Set position of the wire straightening eccentric
to the left until the clamping screw
is
accessible.
- Loosen the clamping screw
and remove the circular knife
.
- Press new circular knife completely into the seat in the knife box.
- Adjust circular knife (cf. Adjusting the circular knife).
4.2.4.3 Adjusting the circular knife
- Fig. 27 -
The circular knife is adjusted so as to ensure clean cutting of the wire.
When the knives are mounted, set the clearance between the flat and circular knives by carefully
“levering” with a screwdriver.
- Loosen clamping screw
and position circular knife
exactly against the flat knife by "levering"
with a screwdriver.
- Tighten clamping screw
.
- After having installed the knives box
align the stitching wire according to chapter 3.5 if
necessary.
If the distance between the knives is set too close the knife slider 5 may block and cause a wire
jam.
Summary of Contents for M 45/6
