1
The 2 separate amplifiers come pre-mounted to a plate which is used if you are
installing onto FLH (Street Glide/Ultra) model bikes. There is a second plate in the
box which is used when installing on a FLTR (Road Glide) model bike.
This is a powerful amplifier and is made to work with
4
Ω
ohm speakers only
.
The amplifier has built in protection and will turn itself off if your charging system/
battery goes below 10.5 volts.
In very high heat situations the 600.4 amplifier will shut itself off before it damages
itself. Once cooled down to safe operating temperatures, it will turn itself back on.
BEFORE gETTINg STARTEd
The WBA 600.4 amplifier is a Class D design. It should be
understood that ALL Class D amplifiers, regArDLess of BrAnD, cause
a reduction in fM reception. The WBA 600.4 features a proprietary
circuit design called r.e.M.I.T. (reduced electro Magnetic Interference
Technology) that Wild Boar Audio believes gives the BesT fM reception
available for any Class D Amplifier designed for a motorcycle.
If you add additional amplifiers to your system, reduction
of fM reception is increased and is considered normal.
Wild Boar Audio understands that some riders prefer the cosmetics of
in fairing antennas, however it should be noted that noTHIng
works as well as the factory antenna. If fM is an important part of
your riding experience, we strongly advise against the use of
any in fairing type antenna!
