background image

17

Wild Boar Audio branded amplifiers are warranted for a period of 3 years to  
the original purchaser. Proof of purchase is required for all warranty claims.  
Products found to be defective during the warranty period will be repaired or 
replaced (with a product deemed to be equivalent) at Wild Boar Audio’s sole 
discretion. Wild Boar Audio’s complete warranty policy is available on the website 
at www.wildboaraudio.com

Please note: in the event of a warranty claim, if one of the 2 amplifiers that make 
up WBA 600.4 fails, we will replace the defective amplifier ONLY!  
 

What Is not Covered:

 

1)  Any expense related to the removal or re-installation of products.

 

2)  Repairs to these products performed by anyone other than Hogtunes, Inc.

 

3)  Subsequent damage to any other components.

 

4)  Any product purchased from a non-authorized Wild Boar Audio dealer.

 

5)  Damage to products from an accident or collision.

 

6)  Damage from incorrect installation, improper use, abuse or modifications.

 

7)  Reduction of FM reception.

 

8)  Damage caused by incorrect factory radio “re-flash” and amp combination 

 

9)  Damage to inbound warranty product due to improper packing.

IMPORTANT: In the event of a warranty claim, please fill  

out the form in the Warranty section of our website  

www.wildboaraudio.com. Valid claims will have a Return  

Authorization Number (RA#) generated which MUST appear  

on the outside of the box when it arrives to our offices. 

Goods Arriving Without An RA# Will Be Refused!

warranty information

Please record your amplifier’s serial #’s here:

“Master aMp”

“slave aMp”

Wild Boar Audio is owned by Powersports Audio Inc.

Summary of Contents for WILD BOAR AUDIO WBA 600.4





















Reviews: