10
IMPoRTAnT!
In this install, we refer to the “1st amp” as the Master,
and the 2nd amp as the slave. on street glide/Ultra,
the Master Amp is on the left side of the plate. on Road
glide/Rg Ultra, the Master Amp is on the back side of
the plate. In all cases, the Master Amp is what is
powering your front fairing speakers and the slave is
powering speakers elsewhere on the bike.
Step #4: Locate the “input link” harness included in the box. Take the blue 4 pin
male plug on the “input link” and plug into the empty blue 4 pin female
plug on the Master Amps input harness. The 8pin plug on the
input link will now plug into the “input” on the Slave Amp. This is how
we get music from the Master Amp to the Slave Amp. When done,
you will have a blue 4 pin female plug on the input link that is empty.
Although not used for this install, this empty plug could be used to send
music to a 3rd amp later on.
Step #5: The last connection to the Slave (right side on Street Glide or Front amp
on Road Glide) amplifier is to the second set of speakers in the system.
If you are using Hogtunes lids, the harness that comes with the lids will
work its way up the bike, and plug right into the 4 pin black amplified
out “pigtail” on the Slave Amplifier.
If you are using Hogtunes LC-Lower-RM Kit for speakers in the lowers of
liquid cooled touring bikes, the harness included with the kit will also
plug directly into the 4 pin black amplified out “pigtail” on the Slave
(front) amplifier.
In all other cases you will use the “ACC” harness included in this kit
that has a 4 pin black plug on one end, and wires on the other. This
will plug into the amplified out “pigtail” on the Slave Amplifier and
“hardwire” the second set of speakers to this harness. The wires on
the supplied ACC harness are clearly labeled which will make wiring
easy. To avoid unnecessary warranty calls, please do a GOOD JOB of
joining the wires together.
