12
The seat height is dependent on the chosen rear wheels and front cas-
tors, as well as on the height of the rear axle and the position of the front
castors in the front castor forks (31).
The
SWINGBO Plus
wheelchair will be built in accordance with the
customer’s order. It is possible for the technician to modify the wheelchair
with a different seat height.
The
SWINGBO PLUS
wheelchair can be supplied with rear wheels
inclined (camber) 6° (32 left) or 9° (32 right) from the vertical.
The
SWINGBO Plus
wheelchair will be built in accordance with the
customer’s order. It is possible for the technician to modify the wheelchair
with a different camber.
4.4 Seat depth
• To adjust the seat depth remove the seat cushion first.
• Loosen the four screws under the seat and adjust the seat depth by
sliding the seat to the required position.
To get the maximum stability the four screws should be positioned with a
distance (to each other) as far as possible.
Whenever you change any settings on the wheelchair,
make sure that you firmly tighten any screws that have
been loosened.
4.5 Backrest height
(backrest panel trough shaped and height adjustable)
If your
SWINGBO Plus
wheelchair is supplied with a trough shaped, 2-
parts, height adjustable backrest, please proceed as follows:
• To adjust the seat depth remove the backrest cushion first.
• Loosen the four screws on the backrest panel and adjust the backrest
height by sliding the panel to the required position (34).
4.6 Backrest height (angle- and height adjustable)
If your
SWINGBO Plus
wheelchair is supplied with an angle- and height
adjustable backrest please proceed as follows:
• Loosen the four screws on the backrest panel and adjust the
backrest height by sliding the panel to the required position (35).
Whenever you change any settings on the wheelchair,
make sure that you firmly tighten any screws that have
been loosened.
31
32
33
34
35
