19
5.7 Foot rest lock (optional)
The foot rest bracket can be supplied additionally with a locking
device. When adjusting the foot rest angle, the locking device must
also be adjusted, by loosening the screws on the right and the left
side.
By pulling the release ring, the foot rest can be folded upwards. When
the foot rest is folded down, it will automatically lock into position.
All four screws on the footrest must be fixed.
5.8 Foot rest
Foot rest to position the feet (66).
5.9 Foot rest with heel stop
Foot rest to position the feet with additional heel stop. The heel stop
prevents the sliding of the feet (67).
5.10 Single foot rest hanger
(with two single footplates in boat shape)
• Function and attachment of the knee angle are described in
5.5
.
• Function and attachment of der foot rest angle are described in
5.6
.
• Function and attachment of the foot rest lock are described in
5.7
.
• Function and attachment of the lower leg length are described in
5.11
but it is necessary (if your wheelchair is equipped with the
single foot rest hanger) to position both foot plates into the desired
position.
5.11 Lower leg length
After releasing both clamping screws on the footboard bracket (69) it
is possible to adjust the required lower leg length continuously:
• Retighten the clamping screws securely.
Whenever you change any settings on the wheelchair,
make sure that you firmly tighten any screws that have
been loosened.
5.12 Seat cushion
The HOGGI seat cushion is 3 cm thick and is foam filled.
The cushion cover is washable and can be unzipped to remove the
foam pad.
67
68
69
65
70
66
