background image

3

 Adres producenta/ Adresse des Herstellers/ Manufacturer’s Address/ Адрес производителя 

GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21, 05-800 Pruszków

EN

USER’S MANUAL

HEAT GUN HT2C551

Thank you for purchasing our product. Manufactured to a high standard, this 

product will, if used according to these

instructions, and properly maintained, give you years of trouble free per-

formance.

ENVIRONMENTAL PROTECTION 

Symbol indicating separate collection of electrical and electro-

nic equipment waste. Used electrical appliances are secondary 

raw materials - they must not be disposed of in household wa-

ste, as they contain substances hazardous to human health and 

the environment! Please actively help us to manage natural 

resources and protect the environment by handing over used 

equipment to the waste electrical equipment storage point. To reduce the 

amount of waste disposed of, it is necessary to reuse, recycle or recover it in 

another form.

GENERAL INFORMATION 

The device is intended for use both in private households and for commer-

cial purposes. The heat gun is designed to be blown with a hot air stream. 

It can be used for removing oil paints and varnish coatings, soldering with 

tin alloy (60% Sn 40% Pb) with a melting point of about 400˚C, shrinking 

thermo-shrinkable materials, heating of objects, thawing, drying, welding of plastic elements, etc. Any other use is not intended and 

may lead to property damage or even personal injury. Use the device only in accordance with this manual. The manufacturer does not 

assume any liability for damage caused by improper use.

GENERAL SAFETY CONDITIONS 

It is within the scope of the owner and user’s responsibility to read, understand and follow these rules:

IMPORTANT: 

 Please read this manual carefully. Please pay special attention to the requirements of safe use, warnings and 

notices. Use the product correctly and carefully for the purpose for which it is intended. Failure to do so may cause damage 

and/or harm to health and will void the warranty. Please keep this manual in a safe place for further use. When passing the 

device on to another person, also give them the user manual.

• Please use the device only for the purpose intended for the device.

•   Please keep the device away from heat, direct sunlight, moisture (under no circumstances immerse in liquid substances) and sharp

edges. Do not operate the device with wet hands.

• Do not leave the device running unattended. Always switch off the unit before leaving the room.

• Check the device regularly for any faults. In case of damage, stop using the device.

• For the safety of children, please do not leave any freely accessible parts of the packaging (plastic bags, cartons, polystyrene, etc.).

WARNING

Don’t let the kids play with the foil. Danger of suffocation!

This device is not intended for use by persons with reduced physical, sensory or mental capabilities or lack of experience and/or skills, 

unless such persons are accompanied and supervised by persons responsible for their safety or have received precise instructions 

for the device usage and understand the risks involved. Children may only use this device if they are over 8 years old and under the 

supervision of a person responsible for their safety or if they have received instructions for use of this device and understand the risks 

involved. Children cannot play with this device.

TECHNICAL DATA

Parameter

Unit of measurement

Value

Index

HT2C551

Network voltage

[V]

~230

Network frequency

[Hz]

50

Rated power

[W]

2000

Run

I

II

Blow temperature

[˚C]

60~350

60~600

Airfl ow

[l/min]

300

500

Electrical insulation class

II

Summary of Contents for HT2C551









Reviews: