Hog Technologies Stripe Hog SH5000, Operation Manual, Page: 75 / 122

75
General Maintenance
6. Lubricate the O-ring lightly with silicon or
Teflon grease and reinstall the screen and
canister.
7. The pump will automatically prime when it is
restarted by the float switch in the debris tank.
Back Flushing the Debris Pump Strainer:
1. Make sure the dirty water level in the debris
tank is at least 10” (25 cm) above the bottom
of the tank.
2. Deactivate the vacuum and waterblasting
systems.
3. Open the back flush valve on the bottom of
the pump strainer.
4. Allow the water to flow until the muck is
flushed from the strainer canister and screen.
5. Close the valve.
Typical Debris Pump, Strainer and Back Flush Valve
(Pump & strainer shown is not the unit used on the SH5500.
It is similar and for educational purposes.)
Strainer Canister
Back Flush Valve