54
Operator’s Manual
Operations
monty universal 2
5.2.2-5
5.2.2-6
5.2.2-7
5.2.2-8
Note:
Stop the Bead Pusher, before it, during the
rotation, comes into contact with the safety
pin (
Figure 5.2.2-5
).
•
Activate the tool control valve lever to lift the bead
and start the rim extraction (
Figure 5.2.2-6
).
Note:
During this phase the turntable must not
be rotated.
•
Activate the clockwise rotation and at the
same time press on the side of the tyre to
keep the bead in the channel, until the bead
extraction has been completed (
Figure
5.2.2-7
).
5.2.2.3
Lower bead extraction
Procedure:
•
Use the demounting tool control lever to bring it in
the maximum extension position.
•
manually lift the tyre, hook it to the tool, keeping on
the opposite side, the bead in the rim channel.
Note:
For this positioning you can use the bead
breaker (
Figure 5.2.2-8
).
•
Use the demounting tool control lever to lift the bead
out of the rim edge
•
Rotate the turntable until the tyre is completely
removed.