46
Operator’s Manual
Operations
monty universal 2
5.1.3-1
2
1
4
3
5
5.1.3
Locking
Figure 5.1.3-1
•
Rotate the rim on the flange of the tyre lever, until
the drag device
1
is brought inside one of the
concentric holes of the rim.
•
Place, on the Quick-Clamping Hub Nut with Pin
clamping device
2
, the suitable taper and relative
plastic guard according to the diameter of the hole
and the type of rim in use.
•
Insert the complete Quick-Clamping Hub Nut locking
tool in the centre of the rim.
•
Raise the peg
3
at the head of the Pin and fully insert
the lock unit in the wheel holder seat.
•
Release the central Peg
3
and make sure that the
locking spheres engage in the relative seats.
•
Move the taper and the Quick-Clamping Hub Nut
closer to the wheel, freeing the ratchets
4
of the nut
itself.
•
Tighten the nut all the way after opening the operating
handles
5
.
The wheel is now locked in place and tire mount/
demount tasks can now be carried out.