Hofmann monty UNIVERSAL 2, Operation Manual, Page: 34 / 92

34
Layout
Operator’s Manual monty universal 2
4.1-3
4.1-5
4.1-3b
5
6
1
2 3
4
Beading device
Figure 4.1-5
WHEN OPERATING THE BEAD SEATER AND
INFLATOR IT IS MANDATORY TO WEAR EAR
PROTECTORS AND SAFETY GLASSES TO
PREVENT CONTAMINATION FROM NOISE, DUST
AND CHIPS BLOWN BY THE AIR JETS.
Press the pedal ( 2 Fig.4.1-3) with the RIGHT foot; the
air exits from the end of the tire beading hose.
DANGER OF TIRE EXPLOSION
For GT model only:
Press the pedal ( 2 Fig.4.1-3) partially with the RIGHT
foot; the air exits from the end of the hose previously
connected to the tire valve.
To perform the “blast”:
HOLD THE BEADING NOZZLE FIRMLY.
• Operate the pedal command ( 1, Fig.4.1-3 )
fully and at the same time use the button ( 5, Fig.4.1-
3b ) on the beading nozzle ( 6, Fig.4.1-3b ).
Note: Air simultaneously continues to come out of the
hose connected to the valve.
WARNING :
ONCE BEADING IS COMPLETE, IMMEDIATELY
STOP INTRODUCING AIR.
Turntable rotation
Press the pedal ( 4 Fig.4.1-3) WITH THE RIGHT FOOT;
the wheel-holder flange rotates clockwise as follows.
1 st speed:
About 3/4 of the way down, the turntable rotates at the
minimum speed (about 7 rpm).
2 nd speed: