22 - 0068
Fig.13A
Fig.13B
mm 235
6.3.3 - WIDTH GAUGE (OPTION)
- Move the width gauge tip into the position indicated in fig. 13Aand keeping
it still, press
.
- Move the gauge tip into the position shown in fig. 13A and keeping it still,
press
.
CORRECT CALIBRATION
- Return the gauge to rest position
- The wheel balancer is ready for operation
N.B. :
- It is advisable to calibrate the width gauge with the assistance of another person so as to correctly
position the gauge tip in the two positions required and at the same time press button
.
- In the event of errors or faulty operation, the wording
: reappears on the displays:
return the width gauge to rest position and repeat the calibration operation making sure to carry it out
as described above. If the error persists, contact the Technical Service Department.
- In the event of incorrect input in the width gauge calibration function, press to cancel it.
300
MENU
