Hoffrichter LAVI, User'S Manual For Patients

Page: 86 / 102

86 Chapter 9: Appendix
Error messages
The following error messages may arise while booting the device:
Error message
Cause Solution
Flash not working No access to the flash Device cannot be booted and
must be serviced
Default parameters are
on the device No valid parameter set avail-
able or faulty The device uses the default
parameters (factory settings)
and can continue to be utilised
Calibration data corrupt Sensor calibration data cor-
rupt Device can continue to be used,
perform flow sensor calibration
Event log file faulty Reading of event data failed Device can continue to be used
but must be serviced
Primary Alarm Not
Working Primary alarm sound trans-
mitter is defective Device can continue to be used
but must be serviced
Secondary alarm sound
transmitter is defective Secondary alarm sound
transmitter is defective Device can continue to be used
but must be serviced
No alarm sound trans-
mitter available Primary and secondary alarm
sound transmitter are defective Device can continue to be used
but must be serviced
RYB LED error Info LED defective Device can continue to be used
but must be serviced
Real-time clock error Real-time clock defective or
clock battery low/depleted Device can continue to be used
but must be serviced
Please note: Date recording con-
tains incorrect date and time
information.
Card reader error
Card reader
defective
Device can continue to be used
but must be serviced
Boot error + error num-
ber Device booting failed due to
a critical error Device cannot be booted and
must be serviced
Blower servicing
required Maximum blower run time
reached Device can continue to be used
but must be serviced