Hoffmann MONTY 3550 TTGP, Service Manual

Page: 90 / 100

Passenger Tire Changers Service Manual 07-13 Rev.B
90

Place the tool on the rim, as normal operation, and then lock it.

Make sure that the clearance between plastic protection and
rim is 1mm.

If the clearance is higher, release the arm, unlock the screws
and tighten them accordingly. Then lock the screws again.

If the clearance is lower, release the arm, unlock the screws
and loosen them accordingly. Then lock the screws again.

Check if the machine works fine
TO ADJUST THE HORIZONTAL ARM BLOCKING PLATE ON 26” AND SUPER LX VERSIONS::

Unlock the horizontal arm.

Unlock the 6mm counter nuts

Tighten as much as possible the horizontal blocking cylinder
adjustment set screws in order to block the arm.

Turn counter clockwise both set screws at ½ turn every step
until the horizontal arm will move smoothly again.

Block the counter nuts again.

Mount the plastic protection.

Check if the machine works fine.
TO ADJUST THE HORIZONTAL TOOL CLEARANCE ON 22” 24” VERSIONS:

Remove the rear cover to access to the cylinder. According to the
model the cylinder will be install in different configuration.