Passenger Tire Changers Service Manual 07-13 Rev.B
50
TO CHECK THE CYLINDER:
Pull the yellow button of the valve to allow the lifting of the vertical rod.
Check if the cylinder is leaking air.
TO REPLACE THE CYLINDER:
Disconnect the air pressure and the power supply.
Disconnect the air pipe from the cylinder.
Disconnect the automatic tool cylinder from the its bracket.
Release the two set screws that secure the cylinder to the arm.
Remove the upper screw from the vertical
Remove the cylinder from the vertical by using the rubber hammer.
Mount the new cylinder on the vertical rod.
Fix the tool cylinder to the bracket.
Secure the bottom side of the cylinder with the two set screws.
Mount the tool cylinder again.
Install the pipe.
Plug the machine to air pressure and power supply.
Check if the machine works fine again.
6.9 VALVE WITH YELLOW BUTTON: CHECK AND REPLACEMENT
:
30’
: Medium cross screwdriver,3 and 4mm allen key,10mm end key.
: Defective valve may cause the following malfunction:
1.
Air leaking from the valve rod or from the fittings.
TO CHECK THE VALVE:
Remove the cylinder cover.
