67
Ver. 04-2015
Use and Maintenance Manual
ENGLISH
Saves the calibration
Confirm
Goes back to the reserved setup screen
Return to main screen
8.3.5 Correction weights
Decreases the value
Increases the value
Displays a calculator to
enter values directly
Confirms the default parameters
Goes back to the reserved setup
screen
Return to main screen
Correctly set the length of the correction weights in order to improve the balancing quality.
Default parameter setting:
Resets the default machine settings.
The zinc weights used for balancing generally become very long as the weight increases; in
this condition the weight can no longer be considered concentrated at the barycentre and
the effect, for example, is a weight of only 47 instead of 50 grams.
Correctly setting the length of the correction weights allows the wheel balancing machine
to automatically compensate for the fact that all the weight cannot be applied at one point.
T
o
obTAIN
The
besT
ResulTs
,
AlWAys
use
WeIGhTs
of
The
sAme
mANufAcTuReR
.
Reserved Setup
