21
Ver. 04-2015
Use and Maintenance Manual
ENGLISH
Use of the wheel balancing machine
Displays the information screen
Selects unbalance display in g/oz
Traceability management
Enables/disables wheel in correction position
Splits the unbalance
Displays the second set of buttons
Lift reset with wheel stopped / STOP during spin
6.4 UNBALANCE MEASUREMENT (first set of buttons)
To perform an unbalance measurement spin, close the guard.
After performing a balancing spin, the following are displayed:
1. The unbalance values.
▪
White: wheel locked in correction position / Internal scanning laser positioned on the side.
▪
Light blue: position not reached / Internal scanning laser not positioned.
2. The red weights that indicate the unbalance position.
3. The weight shadows that indicate where the correction weight should be applied: at the top at 12 o’clock
or at the point indicated by the internal laser.
I
f
The
“
Wheel
IN
posITIoN
”
souNd
Is
eNAbled
,
A
souNd
WIll
be
emITTed
WheN
The
coRRecTIoN
posITIoN
hAs
beeN
ReAched
.
I
f
The
uNbAlANce
Is
less
ThAN
The
ThReshold
vAlue
seT
, oK
Is
dIsplAyed
INsTeAd
of
The
uNbAlANce
vAlue
To
INdIcATe
ThAT
The
Wheel
Is
WIThIN
ToleRANce
oN
ThAT
sIde
.
p
RessING
The
buTToN
you
cAN
IN
ANy
cAse
vIeW
The
ResIduAl
uNbAlANce
.
T
o
Resume
WITh
The
dImeNsIoNs
of
The
Wheel
mouNTed
,
opeN
ANd
close
The
spINdle
.
when on, it indicates that the lasers are moving
when on, it indicates that the lift pedal is pressed
