Hoffer Flow Controls Integrated Cryogenic Electronics HP-319, Quick Start Manual

Page: 17 / 43

HP-319 11 ICE Quick Start Guide
Menu Item Selection Description
Display T/O
(min) Numeric Entry Enter the number of minutes
before ICE defaults back to the
Delivery Mode screen from
another mode. Valid entry is
between 1 and 99 minutes. The
display timeout is strictly time
based, not activity based.
Temp Units: Kelvin
Fahrenheit
Celsius Select the units of measure for
Temperature.
Press Units: psia
psig
bar-a
bar-g Select the units of measure for
Pressure.
Del Units: gallons
liters
ft3
ft3X100
m3
pounds
kilograms Select the units of measure for
Delivery Total. Flowrate will be
displayed in the same units.
NOTE: If Compensation
Method is set to NONE, only
gallons and liters will be
available.
If Fluid Type is CO2, only
pounds and kilograms will be
available.
Compensation: None
Temperature
Temp & Default P
Temp & Pressure Select the method of
compensation. Select None for
pure volumetric measurement.
Pump Delay
(min) Numeric Entry Enter the number of minutes
between 0.0 and 99.0 used for
the cool down phase.
Change
Password Numeric Entry Enter a 4-digit password
between 0000 and 9999. Default
password is 0000.
System Configuration Mode Menu Options