Hoffer Flow Controls Integrated Cryogenic Electronics HP-319, Quick Start Manual

Page: 24 / 43

HP-319 18 ICE Quick Start Guide
INSTALLATION GUIDELINES

ICE should be installed with enough clearance to allow easy
access to all cables. Care should also be taken to install ICE
away from thawing pipes to minimize direct contact with
moisture.

Do not over tighten the mounting bolts. The recommended
tightening torque for the shock mounts is 105 lbs-in.

Hoffer recommends powering ICE directly from the truck
battery. The DC+ power line may be wired through an external
switch if desired, or ICE may be ordered with an optional power
switch installed.

Hoffer recommends grounding the ICE enclosure to the trailer
chassis using the provided ground strap (part #100-2733) for
improved immunity to ESD (electrostatic discharge) and EMI
(electromagnetic interference).

Refer to the installation drawings located in the back of this
manual for wiring information.