25
CAUTION! Never aim the steam jet at people, animals or electric devices!
1 .
Make sure there is enough water in the water reservoir. If not, go to the
7.2 FILLING
THE WATER RESERVOIR
section .
2 . Place the iron upright .
3 . The temperature control knob should be set at least to the
•••Cotton
setting .
4 . Plug the cord into an earthed power supply socket .
5 . The indicator light will turn on . It will go out when the iron has reached the desired
temperature .
6 . Press the steam burst button and direct the soleplate at the fabric .
7.6 STEAM IRONING
1 .
Make sure there is enough water in the water reservoir. If not, go to the
7.2 FILLING
THE WATER RESERVOIR
section .
2 . Place the iron upright .
3 . The temperature control knob should be set at least to
•••Cotton
.
4 . Plug the cord into an earthed power supply socket .
5 .
The indicator light will turn on. It will go out when the iron has reached the desired
temperature .
6 . Set the steam burst power adjustment slider in the desired position .
7 . The iron will give off steam only when in a horizontal position .
8 .
After you have finished steam ironing, move the steam burst power adjustment
slider to the position marked by the “no steam” symbol
.
7.7 ANTI-DRIP function
The anti-drip system makes it possible to iron event the finest fabrics perfectly.
When the ceramic soleplate cools down and the temperature is too low, the Anti-drip
function is automatically activated to prevent water from dripping from the soleplate .
Thanks to this, you can iron the most delicate fabrics without the risk of their spoilage
or dirt .
7.8 AUTO SHUT-OFF function
1 .
Upright position – if the iron remains switched on but not used for about 8 minutes,
the incorporated automatic shut-off function will switch the iron off, and the light
indicator will start blinking .
2 .
Horizontal position – if the iron remains switched on but not used for about 30
seconds, the incorporated automatic shut-off function will switch the iron off,
and the light indicator will start blinking.
To switch the iron on again, just move the appliance and start ironing . If you have
already finished ironing, unplug the iron immediately after you have noticed activation
of the AUTO SHUT-OFF system (the light indicator blinks).
7.9 AFTER IRONING
1 . Place the iron upright .
2 . Unplug the iron from the power supply socket .
Summary of Contents for SI-2098
