background image

19

7 . 

The water inlet cover cannot be opened during use. Fill the water 

tank as described in section 

7.2 FILLING THE WATER TANK.

8 . Before placing the iron on its base, make sure that the surface 

on which the iron is placed is stable .

9 . If the supply cord is damaged, it must be replaced 

by the manufacturer, its service agent or similarly qualified 

persons in order to avoid a hazard .

10 . 

Warning! Risk of burns! 

The soleplate becomes very 

hot during use .

11 . 

Warning!

 Never touch the soleplate of the iron when it is 

switched on! Danger of burns!

12 . 

Warning! 

Do not touch hot metal parts, hot water or steam to avoid burns .

13 .  Pour only water into the tank . The use of distilled water is recommended .

14 .  Be especially careful when there are children in the vicinity of the device!

15 . 

Do not immerse the device, cord and plug in water or in any other liquids! Be especially 

careful when pouring water into the tank .

16 .  Do not touch the device with wet hands .

17 .  Never direct the steam jet at other people or animals .

18 .  Never direct the steam jet directly at electrical devices or devices containing 

electrical components (TV, radio, electric heater) .

19 .  Do not direct the steam jet at unprotected wooden surfaces, unsuitable joints, cold 

glass or plastics .

20 .  Never turn the device upside down or lay it on its side when it is turned on .

21 .  Take care when emptying the water tank - risk of scalding with hot water .

22 . 

To avoid the risk of fire or electric shock, basic safety precautions should be followed 

when using electrical appliances, especially when children are present .

23 .   A device for home use . Only use the device for its intended purpose . Do not use for 

other purposes other than those for which it is intended .

24 .  Before starting operation, the power cord should be carefully unwound .

25 .  Make sure that the power cord does not touch the hot soleplate of the iron .

26 .  After use, switch off the iron, disconnect it from the mains, and then place 

the  appliance  in  an  upright  position. 

Warning! 

The iron will continue to heat up 

for a while.

27 .  When the appliance is not in use or before cleaning, disconnect the plug 

from the socket. Allow the device to cool down before cleaning.

28 .  Do not cover the device when in use . If the appliance is covered or comes into 

contact with flammable material, there may be a risk of fire.

29 .  Never iron clothes worn on them and direct the steam jet at people .

30 .  Do not add fragrances, vinegar or any other chemicals to the water tank, as they 

may seriously damage the device .

Summary of Contents for SI-2098

































Reviews: