HOFFEN
HOFFEN 37
CHANGE WEIGHT UNITS
The
device
is
able
to
perform
measurements in different units. It takes
measurements in
kg
by default.
Using the UNIT button at the bottom, the
user
can
switch
the
device
to
measurements in units such as lb - pounds,
and st - stones.
For measures other than kilograms, the
height in feet and inches - the units of
measurement used in the United Kingdom -
must also be given. If you change units in
weight, but not in the application, the
application will convert the measured values to the units set in the application and
store such results in the memory.
9. CLEANING AND MAINTENANCE
CLEANING OF THE RIGID PARTS OF THE APPLIANCE
Cleaning should only be carried out when the device is switched off and
cooled down, the mains plug is disconnected from the mains socket.
The device may only be cleaned with a dry cloth or paper towel. Do not immerse the
device in water. To clean and disinfect the electrodes and the surface, use a cloth
lightly sprayed with alcohol.
It is forbidden to use water or any other liquids to clean the device.
10. PROBLEMS
In case of any problems with the device, please refer to the following tips.
A message appears
on screen:
Lo
Replace the battery pack as the current is already
discharged.
A message appears
on screen:
Err
Message indicates a measurement problem Re-measure
accurately stepping and standing still on the scale. It also
appears when a person weighs more than 180kg.
A message appears
on screen:
Err2
Message indicates a problem with the measurement of the
body's composition. Re-measure precisely by standing on
the scale and covering with bare feet the electrodes designed
for the left and right foot. In some cases, it helps to gently
moisturise the soles of the feet with water.
A message appears
on screen:
FATL
This message appears when the measurement shows that
the percentage of body fat is less than 5%.
A message appears
on screen:
FATH
This message appears when the measurement shows that
the percentage of body fat is higher than 50%.
