HOFFEN
HOFFEN 27
Remove the cover and install the new batteries according to the polarity shown in the
drawings inside the compartment.
Replace and secure the battery compartment lid by
sliding it in the opposite direction to opening. When replacing the batteries, follow the
same procedure as when you first installed the battery, but remember to remove the
entire set of used batteries and replace them with a new set of three batteries. Turn
the scale over and place it on its feet in a place where it won't disturb any of the
household members. Make sure that it is a stable, dry, flat and solid spot - tiles, panels,
staves, etc. The device must not stand on any surface covered with material - a carpet,
towel, etc. It's best if this place is well leveled. Adherence to the recommendations will
ensure correctness of measurements
BASIC WEIGHT MEASUREMENT
Before using the device, ensure that your hands and feet are dry and that the
surface of the device is clean and dry.
Stand on the scale with as little clothing as possible and do not hold on to any
surrounding elements. Try not to wobble or move. Otherwise the measurement will
not be accurate.
If you want to compare measurements, always try to do them in the same
circumstances. We recommend that the weighing is performed in the morning.
Stand with both feet on the properly prepared and positioned device. The device
should switched on automatically and the weight of the user should be measured. The
measurement result should start blinking on the screen. After three seconds the result
will stabilize and when it stops flashing we have a trustworthy measurement. When
the user steps off the device, it automatically switches off after a few seconds.
CONNECTING THE DEVICE TO A SMARTPHONE OR TABLET AND
CONFIGURATION OF THE APPLICATION
The application for operating the
device works on smartphones and tablets
using the Android operating system
(version 5.0 to higher) and with an active
Bluetooth module.
To use the advanced functions of the
device, download the
HOFFEN SMART
SCALE
application to your phone or
smartphone using the address:
https://play.google.com/store/apps/details?id=com.chipsea.btcontrol.pl
or by scanning the QR code above
