3
25
SPRAY NOZZLE
7.5 STEAM BURST FUNCTION
The steam burst function is useful for removing creases on clothes, curtains etc. This
function may also be used during dry ironing.
CAUTION! Never direct the steam at people!
1.
Make sure there is enough water in the water reservoir. If not, go to the
7.2 FILLING THE WATER RESERVOIR
section.
2.
Place the iron upright.
3.
The temperature control should be set at least to
●●
Wool
.
4.
Plug the cord into an earthed power supply socket.
5.
The indicator light will turn on. It will go out when the iron has reached the desired
temperature.
6.
Press the steam burst button and direct the iron soleplate at the fabric.
7.6 STEAM IRONING
1.
Make sure there is enough water in the water reservoir. If not, go to the
7.2 FILLING THE WATER RESERVOIR
section.
2.
Place the iron upright.
3.
Set the temperature control to at least
●●
Wool
.
4.
Set the steam burst control to the level 1 position.
5.
Plug the cord into an earthed power supply socket.
6.
The indicator light will turn on. It will go out when the iron has reached the desired
temperature.
7.
Now you can set the steam burst control to the middle or to the
position.
8.
The iron will give off steam only when in a horizontal position.
9. After you have finished steam ironing, move the steam burst control to the
position (no steam).
7.7 AFTER IRONING
1.
Place the iron upright.
2.
Unplug the iron from the power supply socket.
3.
Wait until it cools down.
4.
Empty the water reservoir.
Summary of Contents for POJM180004
Page 1: ...ELAZKO PAROWE STEAM IRON INSTRUKCJA INSTRUCTION MANUAL...
Page 2: ......
Page 16: ...316...
Page 30: ...330...
