HOFFEN MT-2099, Instruction Manual

Page: 31 / 40

31
7.3 Attachment installation/removal
a) Small (2) and large (4) facial hair trimmer
attachments
1 . Make sure that the facial hair trimmer is installed on
the device .
2 . Install one of the two attachments . making sure that
the head blades enter into the space on the attachment
on the teeth side, then press to tighten . A slight “click”
may be heard .
3 . To remove the attachment, pry it from the back of the
trimmer, lift, and take off .
b) A set of three attachments for the face and body
trimmer (7 ) .
1 . Make sure that the face and body trimmer head is
installed on the device .
2 . Gently insert the face and body trimmer attachment
sides on the trimmer head side guides, then press
down to tighten .
3 . A delicate characteristic “click” will be heard .
4 . To remove the face and body trimmer attachment,
gently pry the tabs on the face and body trimmer
attachment sides with your fingernail, then pull the
attachment up .
7.4 Turning the device on/off
1 . To turn the device on, rotate the ON/OFF switch / battery
compartment opening until the arrow points at I .