HOESCH SensePerience 68986.101401, Planning, Installation And Operating Instructions

Page: 14 / 40

14
GB
03.05 Maintaining the spray nozzle
A
B
C
1.
2.
1. Unscrew the screw on the spray
nozzle (B) using the attachment (A)
and a 5-mm Allen key (see assembly
pack)
2. Unscrew the spray nozzle (C) using
tubular hexagon box spanner no. 8
3. After descaling the nozzle, screw the
above parts back in with moderate
force
The nozzles must be used regularly and cleaned too. They must also be descaled regularly to prevent limescale from building up. For
this we recommend our Hoesch descaler, item no. 692101
04 Operating Instructions
⚠
WARNING: Children should not be allowed to use the device without supervision, unless proper instructions were
given, to operate the device safely and the child understands dangers of its incorrect use.
Initial start up
For initial start up professional installation is necessary based on installation instructions required.
04.01 Control panel
Operation
(valid for the panel with a control panel)
3
Operating panel ON/OFF.
Keeping the button pressed for 3 seconds
→ switches
off the operating panel, all the activated functions will be
switched off.
6
Spray nozzle on. Turns on when knob 1 is switched to the ON position (see point 04.02.)
Note! The spray nozzle must be rinsed out regularly to prevent the build-up of bacteria.
We recommend turning the spray nozzle on for around one minute a week when it has not been used for more than 72
hours
7
Cascade on. Turns on when knob 1 is switched to the ON position (see point 04.02.)
8
On/off overhead shower, showering time 20 minutes. Turns on when knob 1 is switched to the ON position (see point
04.02.)
2
On/off Scottish massage. Turns on when knob 1 is switched to the ON position (see point 04.02.)
Alternating hot and cold water. Hot water for 2 minutes, cold water for 5 seconds, hot water for 2 minutes, cold water for 5
seconds, hot water for 2 minutes. [W2] shows the remaining massage time.
1
ON/OFF steam bath + temperature selection.
The temperature (38, 40, 42, 44, 46, 48, 50°C) can be selected once the steam generator has been switched on.
[W1] indicates the selected temperature.
Steam bath readiness is indicated every 30 seconds by the halogen light
fl ashing 3 times or by the white colour-light.
5
Sets the steam bath duration (10, 20, 30 minutes) / Switches off the steam generator. [W1] stops fl ashing once the target
temperature has been reached. After that the steam bath duration is selectable. You can extend the bath time during
steam bathing.
During steam bathing water massage functions are disabled.
The head spray (cold shower!) can be activated as long as the button is pressed while the steam function is running.