HOESCH SensePerience 68986.101401, Planning, Installation And Operating Instructions

Page: 13 / 40

13
GB
02.02 Steam generator technical data
,
1000x1000 1200x1000
1400x1000 1600x1000
1800x1000
Steam generator
3,3 kW 4 kW*
Voltage
1N~230 V, 50/60 Hz
Fuse protection
16 A 20 A
Line cross section
3 x 2,5 mm²
Water connection (Cold Water + Hot Water)
R½“
Steam output
4,2 kg/h 6,5 kg/h
03 Caring for the steam bath/shower cabin
After showering/steaming, rinse the tray and wall element surface with water and wipe down with a damp cloth. Do not use scouring
agents! For occasional thorough cleaning, use a few drops of cleaning agent, e.g. Hoesch Cleaner (item no. 6999 00), on the surface
and rub with a soft, dry cloth. Remove heavier soiling using warm water and liquid cleaning agent or a soap lye. Wipe away scale
deposits using vinegar and water (
avoid contact with the fittings! ). Observe the manufacturer's instructions if using drain cleaners!
Remove slight scratches or rough areas in glossy surfaces with the Hoesch Sanicryl care set (item no. 699100, follow instructions!).
Remove deep scratch marks or burns on glossy or matt surfaces using
fi ne sandpaper (no. 800-1500) or a fi ne steel wool metal eraser
by rubbing carefully in one direction in a large area around the scratch. Treat glossy surfaces only with special polishing cream.
03.01 Caring for the glass panels and pro fi les
■ After showering, quickly rinse the partition with clean water.
■ Use only a damp rag (never dry) to wipe down the panels and frame. You can also use a squeegee to dry the panels.
■ Only use gentle cleaners such as a weak vinegar and water solution. Never use cleansing powder or cleaners containing
chlorine.
■ Do not use micro fi ber cloths. They destroy any coatings and may cause the glass to become scratched.
■ It is a good idea to lightly oil sliding and swinging doors so they remain easy to open.
03.02 Caring for the fi ttings
For day-to-day cleaning, use neutral or citrus-based cleaning agents only. Use cleaning agents intended for cleaning fi ttings only. Follow
the instructions for the cleaning agent!
Spray cleaning agent onto a cloth and use it to clean the
fi ttings.
Rinse the fi tting with plenty of water and polish with a soft cloth.
03.03 Do not use ...
■ Scouring or scraping cleaning textiles or sponges.
■ Cleaning agents with fl uid acids such as hydrochloric or citric acid.
■ Scouring agents.
■ Cleaning agents containing chlorine bleach lye.
03.04 Anti-slip coating
(Optional)
Durable, anti-slip coating applied on acrylic and mineral cast surface. It ensures a maximum of safety and bathing
comfort. Aesthetic transparent patterns with a gentle structure create new visual effects in the bathroom. The
anti-slip coating is smooth, which allows for easy cleaning of the shower tray. Showering is safe and more pleasant
for the user.
⚠
Attention! Do not grind the surface with anti-slip coating!