9
Hodedah
www.hodedah.com
support @hodedah.com
Assembly Instruction Set A Step 1
- Fix both Panel #2 onto Panel #1 by inserting the dowels onto the respective non-thru holes at Panel #1.
- Use Allen Key N to tighten 4 screw F from the thru-holes of Panel #1 to non-thru hole of both Panel #2, as shown.
CSK Cap Screw
M6 x 40mm
4 pcs
F
Allen Key
1 pc
40MM
CAUTION
When inserting the Dowels to non-thru holes, don't push to hard. Otherwise, the side panels (2)
may be damage.
N
- Fix Panel #3 onto Panels #2 upper . Align properly by inserting the dowel of Panel #3 onto non-thru holes of Panels #2.
- Pushing & light tapping of Panel #3 to have Panel #2 & 3 fix tightly.
- Insert 2 Minifix Housing J1 onto non-thru holes at Panel #2.
- Fix Panel #4 onto Panels #2 lower. Align properly by inserting the dowel of Panel #4 onto non-thru holes of Panels #2.
- Pushing & light tapping of Panel #4 to have Panel #2 & 4 fix tightly.
- Insert 2 Screw G onto thru holes at Panel #4. Use Allen key P to tighten all the Screws G & Minifix J1.
J1
N
F
N
1
2
2
3
4
CSK Cap Screw
M6 x 40mm
2 pcs
F
40MM
Minifix Housing
5654
2 pcs
2
2
F
F
N
J1
F
F
F
J1
N
